Published: 22nd January
Asbestos Removal Services

How To Remove Asbestos Flooring

Throughout the last century, asbestos floorboards were commonly used. Consequently, they are prominent in houses and structures developed during that time frame. There’s no need to be concerned about the tiling as long as they’re firmly in position. However, if you decide to remove them to change the previous flooring, you should do it with utmost caution since disrupted asbestos poses a significant health risk. Learn about Asbestos Tile Removal here.

Why Is Asbestos Flooring So Dangerous?

There is no imminent danger of harmful asbestos fibers getting discharged into the atmosphere and ingested, provided the tiling is not disrupted in any manner. Nonetheless, should you discover that any panels are degrading, you should contact Asbestos Removal Melbourne.

This is because any fractured tiles or tiles with cracking or cracking areas might be deadly. Asbestos has been linked to several deadly illnesses, such as lung cancer, asbestosis, and mesothelioma. Whenever asbestos fibers are inhaled, these go to the lungs, wherein they inflict the most severe harm. Asbestos fibers are also stuck in the mucosal surfaces of the nasal passages, and they may find their way to the stomachs.

licensed asbestos removal

Tools and Equipment You Need to Remove Asbestos Flooring

As a result, it would be necessary to wet the floor thoroughly. Similarly, the old glue beneath the tiles must be removed and replaced with new adhesive. Keep things as moist as feasibly possible; this is of critical significance. Once the procedure is finished, it is advised that you use a HEPA vacuum to remove any remaining dust.

For the practical tile removal process, you would require the following tools and equipment:

Rags

Buckets of water

Pump sprayer

A shovel

A hammer

A sharp knife

A scraper

How to Remove the Asbestos Flooring?

There are many risks involved in the removal of asbestos flooring. To begin with, when you tear any block into bits when removing it, you have made it a crumbly substance.

But, keeping the tiles unbroken while removing them is difficult. Furthermore, the old glue behind the tiles may contain asbestos.

To begin with, complete personal protection gear must be worn throughout the operation. This contains disposable overalls with hoods, gloves, laces-free boots, and, more significantly, lung protection gear.

For this task, an essential dust mask would not be sufficient. A partial or complete face mask with a HEPA filter is required. Following that, you would need to get specific equipment and materials and complete several critical stages, which are explained below.

But first, let’s take a look at the most common tile removal procedure. Place the scraping in the cracks between the tiles and lift the tile. This should be performed with extreme caution to prevent shattering any tiles.

The scraping would need to be pounded with a sledgehammer to pull off difficult-to-remove tiles. When there are numerous floor tiles to replace, you may have to use a scoop rather than a scraper to accelerate the procedure. However, because the shovel is more significant, you fear shattering the tiles in operation. You would also need to moisten the tiling and the spaces beneath them while keeping the working area damp and limiting the chance of asbestos fibers entering the air.

It is critical to moisten the asbestos paper tile underlay before removing it thoroughly. Scrape away any clinging adhesive as well. It is recommended to soften it somewhat by using a solvent, dry ice, or warming it with an infrared lamp.

As you’ll see, cleaning asbestos tiling is a complicated process that requires time, tolerance, and a considerable amount of care and attention. Given that and the risks associated, it’s advisable to hire Asbestos Removed to remove the flooring.